iFlight Borg Race 5.8G 200mW VTX
Of the 81 other 5.8 GHz analog video transmitters in our database, 3 have a lower maximum power than the Borg Race 5.8G 200mW VTX (200 mW, 23 dBm), 4 the same and 74 a higher one; the class median is 800 mW. The Borg Race 5.8G 200mW VTX steps through 25 / 100 / 200 mW, which is 14 / 20 / 23 dBm: the top level is 9 dB above the lowest, about 2.8x the free-space range on the same antennas.
iFlight's own Betaflight VTX table is on this page: 2 bands of 8 channels, 5362–5917 MHz, 3 power levels, IRC Tramp. CLI commands and JSON file.
| System | analog |
|---|---|
| Max power | 200 mW |
| Power levels | 25 / 100 / 200 mW |
| Frequency range | 5362-5917 MHz |
| Band | 5.8 GHz |
| Input voltage | 4.5-28V |
| Mounting | 20x20mm |
| Channels | 16 |
| Antenna connector | U.FL |
| Weight | 3.5 g |
iFlight Borg Race 5.8G 200mW VTX VTX table for Betaflight
The band and channel frequencies and power levels as iFlight publishes them for IRC Tramp control. Paste the CLI commands into Betaflight's CLI tab, or load the JSON file in Betaflight Configurator's Video Transmitter tab. How it works: setting up a VTX table in Betaflight.
| Band | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|
| R RACEBAND | 5658 | 5695 | 5732 | 5769 | 5806 | 5843 | 5880 | 5917 |
| L LOWRACE | 5362 | 5399 | 5436 | 5473 | 5510 | 5547 | 5584 | 5621 |
Frequencies in MHz; "—" is an unused slot. Power levels: 25 (value 25), 100 (value 100), 200 (value 200).
vtxtable bands 2
vtxtable channels 8
vtxtable band 1 RACEBAND R CUSTOM 5658 5695 5732 5769 5806 5843 5880 5917
vtxtable band 2 LOWRACE L CUSTOM 5362 5399 5436 5473 5510 5547 5584 5621
vtxtable powerlevels 3
vtxtable powervalues 25 100 200
vtxtable powerlabels 25 100 200
saveSource: https://shop.iflight.com/index.php?route=product/product/download&download_id=500 — iFlight's own Instructions PDF (BV19232_Borg Race 5.8G 200mW VTX lnstructions.pdf), linked from the Downloads list of the shop.iflight.com product page, read off the page's drawing coordinates. Two bands of eight, BAND R 5658-5917 MHz and BAND L 5362-5621 MHz, both in 37 MHz steps, and that is the whole radio: the manual's LED legend counts only '1 flash=Band R, 2 flashes=Band L' and the page states 'Output 16 channels'. There is no A/B/E/F band here. The three power values are the legend read across ('1 flash= 25mW, 2 flashes = 100mW, 3 flashes= 200mW'), which is the page's 'Power: PIT/25mw/100mw/200mw' without PIT - the double-press mode, not a step. Band names are Betaflight's own for the letters the manual prints; the manual prints the letter only.
Transmitting is only legal on the frequencies and power your country allows; see VTX frequency bands.
Every manufacturer table in the database, with one archive of all the files: VTX table library.
Choosing between systems? See analog vs DJI vs Walksnail vs HDZero.
Where this data comes from
iFlight's product page prints the labelled block: Power: PIT/25mw/100mw/200mw, Antenna interface: IPEX, VTX protocol: IRC Tramp, Output 16 channels, Size: 25*25*3.7mm, Mounting pattern: 20*20mm, Weight: 3.5g - and the manual (BV19232_Borg Race 5.8G 200mW VTX lnstructions.pdf) repeats every line of it. channels is 16 because the manual's frequency table is two bands of eight and not the usual five or six: BAND R 5658-5917 MHz and BAND L 5362-5621 MHz, with its LED legend confirming '1 flash=Band R, 2 flashes=Band L'. That is the whole radio - there is no A/B/E/F here - and frequency_range is the table's edges, 5362-5917 MHz (L1 5362, R8 5917; manual read again 2026-10-20), not the 5.8 GHz class label it held until then. input_voltage is the manual's port line, 'DC IN: Positive, input voltage 4.5-28V', which the page's feature list states as 4.5V-28V and 2S-6S. antenna_connector is the column's U.FL spelling: the block says IPEX and the page's feature list says IPEX-1, which is U.FL. The 25*25*3.7mm size is the board, not a pattern; mount_mm is the labelled mounting line. Like the BLITZ Race 25mW it drives an LED strip, with 1.5A current limiting.