Foxeer Reaper Infinity 7.2GHz 10W
Of the 7 other 6.0-8.5 GHz analog video transmitters in our database, 7 have a lower maximum power than the Reaper Infinity 7.2GHz 10W (10000 mW, 40 dBm); the class median is 5000 mW. The Reaper Infinity 7.2GHz 10W steps through 1000 / 2500 / 5000 / 7500 / 10000 mW, which is 30 / 34 / 37 / 39 / 40 dBm: the top level is 10 dB above the lowest, about 3.2x the free-space range on the same antennas.
| System | analog |
|---|---|
| Max power | 10000 mW |
| Power levels | 1000 / 2500 / 5000 / 7500 / 10000 mW |
| Frequency range | 6.1-7.2 GHz |
| Band | 6.0-8.5 GHz |
| Input voltage | 9-36V |
| Power draw | 4.7 A at 10 V, 2.0 A at 20 V (10 W output) |
| Mounting | 20x20mm M2 |
| Channels | 64 |
| Antenna connector | SMA |
| Weight | 50.0 g |
Other transmitters in this band, side by side: 6-8.5 GHz (incl. 7.2 GHz) FPV VTX compared.
Choosing between systems? See analog vs DJI vs Walksnail vs HDZero.
Where this data comes from
Foxeer's own spec table (SKU MR1879), whose 'Name' row reads 'Reaper 7.2G 10W VTX' while the product title says Reaper Infinity 7.2G: 9~36V in, 5V out, 64CH, 1W/2.5W/5W/7.5W/10W, 50 g, 66.5*37*16.5 mm, 'Mounting Hole: 2 Groups/20*20mm M2 2.5mm depth', SMA, GH1.25 8P control cable, 4.7 A at 10 V at full power. The eight bands of eight run 6110-7190 MHz, which is the 6.1-7.2 GHz recorded here; one figure in the table is out of sequence (band H ends '7170 7190 7120' where every other row steps +20 MHz), so the top edge is taken from the 7190 MHz that fits the step and the anomaly is recorded rather than corrected. 10 W at 7 GHz is licensed spectrum almost everywhere - check local rules before transmitting. power_draw is the maker's own supply figure, 'Consumption: 10V/4.7A & 20V/2.0A;10W', read 2026-10-17; it is the VTX's input draw, not its RF output.